The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r18 |
|
| Name | AMI8000-0000-0020 Servo motor 48 V DC (DS402) |
|
| PID | 0x0003010f |
|
| Revision Code | 0x00120001 |
|
| Equivalant Devices | AMI8000-0100-0020 r18 |
|
| TX PDOs | 0x1a00: DS402 Position actual value |
|
0x6064:00 Position actual value UDINT (32 bits) |
||
0x1a01: DS402 Statusword |
||
0x6041:00 Statusword UINT (16 bits) |
||
0x1a02: DS402 Velocity actual value |
||
0x606c:00 Velocity actual value DINT (32 bits) |
||
0x1a03: DS402 Torque actual value |
||
0x6077:00 Torque actual value INT (16 bits) |
||
0x1a04: DS402 Info data 1 |
||
0x1a05: DS402 Info data 2 |
||
0x1a06: DS402 Following error actual value |
||
0x60f4:00 Following error actual value DINT (32 bits) |
||
0x1a07: DS402 Touch probe status |
||
0x60b9:00 Touch probe status UINT (16 bits) |
||
0x1a08: DS402 Touch probe 1 positive edge |
||
0x60ba:00 Touch probe 1 positive edge DINT (32 bits) |
||
0x1a09: DS402 Touch probe 1 negative edge |
||
0x60bb:00 Touch probe 1 negative edge DINT (32 bits) |
||
0x1a0a: DS402 Touch probe 2 positive edge |
||
0x60bc:00 Touch probe 2 positive edge DINT (32 bits) |
||
0x1a0b: DS402 Touch probe 2 negative edge |
||
0x60bd:00 Touch probe 2 negative edge DINT (32 bits) |
||
0x1a0c: DS402 TxPDO Data Invalid |
||
0x603e:02 TxPDO Data invalid__Position actual value BOOL |
||
0x1a0d: DS402 Info data 3 |
||
0x1a0e: DS402 Modes of operation display |
||
0x6061:00 Modes of operation display USINT (8 bits) |
||
0x1a0f: DS402 Torque limitation status |
||
0x60cc:00 Torque limitation status USINT (8 bits) |
||
0x1a10: DS402 Digital Inputs |
||
0x60fd:00 Digital Inputs UDINT (32 bits) |
||
0x1a11: DS402 Touch probe time stamp 1 positive value |
||
0x60d1:00 Touch probe time stamp 1 positive value UDINT (32 bits) |
||
0x1a12: DS402 Touch probe time stamp 1 negative value |
||
0x60d2:00 Touch probe time stamp 1 negative value UDINT (32 bits) |
||
0x1a13: DS402 Touch probe time stamp 2 positive value |
||
0x60d3:00 Touch probe time stamp 2 positive value UDINT (32 bits) |
||
0x1a14: DS402 Touch probe time stamp 2 negative value |
||
0x60d4:00 Touch probe time stamp 2 negative value UDINT (32 bits) |
||
| RX PDOs | 0x1600: DS402 Controlword |
|
0x6040:00 Controlword UINT (16 bits) |
||
0x1601: DS402 Target velocity |
||
0x60ff:00 Target velocity DINT (32 bits) |
||
0x1602: DS402 Target torque |
||
0x6071:00 Target torque INT (16 bits) |
||
0x1603: DS402 Commutation angle |
||
0x60ea:00 Commutation angle UINT (16 bits) |
||
0x1604: DS402 Torque limitation |
||
0x6072:00 Max torque UINT (16 bits) |
||
0x1605: DS402 Torque offset |
||
0x60b2:00 Torque offset INT (16 bits) |
||
0x1606: DS402 Target position |
||
0x607a:00 Target position DINT (32 bits) |
||
0x1607: DS402 Touch probe function |
||
0x60b8:00 Touch probe function UINT (16 bits) |
||
0x1608: DS402 Modes of operation |
||
0x6060:00 Modes of operation USINT (8 bits) |
||
0x1609: DS402 Velocity offset |
||
0x60b1:00 Velocity offset DINT (32 bits) |
||
0x160a: DS402 Positive Torque limit value |
||
0x60e0:00 Positive torque limit value UINT (16 bits) |
||
0x160b: DS402 Negative Torque limit value |
||
0x60e1:00 Negative torque limit value UINT (16 bits) |
||
0x160c: DS402 Low velocity limit value |
||
0x60c8:00 Low velocity limit value DINT (32 bits) |
||
0x160d: DS402 High velocity limit value |
||
0x60c9:00 High velocity limit value DINT (32 bits) |
||
0x1610: DS402 Digital Outputs |
||
0x60fe:01 Digital Outputs UDINT (32 bits) |