The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r20 |
|
| Name | EJ4008 8Ch. Ana. Output 0-10V, 12bit |
|
| PID | 0x0fa82852 |
|
| Revision Code | 0x00140000 |
|
| Equivalant Devices | EL4008 r19 |
|
| RX PDOs | 0x1600: AO Outputs Channel 1 |
|
0x7000:11 Analog output INT (16 bits) |
||
0x1601: AO Outputs Channel 2 |
||
0x7010:11 Analog output INT (16 bits) |
||
0x1602: AO Outputs Channel 3 |
||
0x7020:11 Analog output INT (16 bits) |
||
0x1603: AO Outputs Channel 4 |
||
0x7030:11 Analog output INT (16 bits) |
||
0x1604: AO Outputs Channel 5 |
||
0x7040:11 Analog output INT (16 bits) |
||
0x1605: AO Outputs Channel 6 |
||
0x7050:11 Analog output INT (16 bits) |
||
0x1606: AO Outputs Channel 7 |
||
0x7060:11 Analog output INT (16 bits) |
||
0x1607: AO Outputs Channel 8 |
||
0x7070:11 Analog output INT (16 bits) |