The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 3 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
r17 |
r18 |
|
| Name | EK1828 EtherCAT IO-Coupler (1A E-Bus, 4 Ch. Dig. In, 3ms, 8 Ch. Dig. Out 24V, 0,5A) |
|||
| PID | 0x07242c52 |
|||
| Revision Code | 0x00100000 |
0x00110000 |
0x00120000 |
|
| Equivalant Devices | ||||
| TX PDOs | 0x1a00: Channel 1 |
|||
0x6000:01 Input BOOL |
||||
0x1a01: Channel 2 |
||||
0x6010:01 Input BOOL |
||||
0x1a02: Channel 3 |
||||
0x6020:01 Input BOOL |
||||
0x1a03: Channel 4 |
||||
0x6030:01 Input BOOL |
||||
| RX PDOs | 0x1600: Channel 5 |
|||
0x7000:01 Output BOOL |
||||
0x1601: Channel 6 |
||||
0x7010:01 Output BOOL |
||||
0x1602: Channel 7 |
||||
0x7020:01 Output BOOL |
||||
0x1603: Channel 8 |
||||
0x7030:01 Output BOOL |
||||
0x1604: Channel 9 |
||||
0x7040:01 Output BOOL |
||||
0x1605: Channel 10 |
||||
0x7050:01 Output BOOL |
||||
0x1606: Channel 11 |
||||
0x7060:01 Output BOOL |
||||
0x1607: Channel 12 |
||||
0x7070:01 Output BOOL |
||||