The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 2 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r18 |
r19 |
|
| Name | EL2595 1Ch. LED constant current terminal |
||
| PID | 0x0a233052 |
||
| Revision Code | 0x00120000 |
0x00130000 |
|
| Equivalant Devices | |||
| TX PDOs | 0x1a00: DOX Status |
||
0x6000:01 Status__Ready to activate BOOL |
|||
0x6000:02 Status__Output active BOOL |
|||
0x6000:04 Status__Switching operation counter BIT3 (3 bits) |
|||
0x6000:07 Status__Warning BOOL |
|||
0x6000:08 Status__Error BOOL |
|||
0x6000:0c Status__Digital input BOOL |
|||
0x6000:10 Status__TxPDO Toggle BOOL |
|||
0x1a01: DOX Synchron info data |
|||
0x6000:11 Info data 1 UINT (16 bits) |
|||
0x6000:12 Info data 2 UINT (16 bits) |
|||
0x1a02: DC Feedback |
|||
| RX PDOs | 0x1600: DOX Control |
||
0x7000:02 Control__Output BOOL |
|||
0x7000:04 Control__Input trigger enable BOOL |
|||
0x7000:08 Control__Reset BOOL |
|||
0x1601: DOX Current |
|||
0x7000:11 Output current UINT (16 bits) |
|||
0x1602: DOX Impulse length |
|||
0x7000:12 Impulse length UDINT (32 bits) |
|||
0x1603: DOX Trigger delay |
|||
0x7000:13 Trigger delay UDINT (32 bits) |
|||
0x1604: DC Sync |
|||