The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 4 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
r17 |
r18 |
r19 |
|
| Name | EL3101 1Ch. Ana. Input +/-10V Diff. |
||||
| PID | 0x0c1d3052 |
||||
| Revision Code | 0x00100000 |
0x00110000 |
0x00120000 |
0x00130000 |
|
| Equivalant Devices | |||||
| TX PDOs | 0x1a00: AI Standard |
||||
0x6000:01 Status__Underrange BOOL |
|||||
0x6000:02 Status__Overrange BOOL |
|||||
0x6000:03 Status__Limit 1 BIT2 (2 bits) |
|||||
0x6000:05 Status__Limit 2 BIT2 (2 bits) |
|||||
0x6000:07 Status__Error BOOL |
|||||
0x6000:0e Status__Sync error BOOL |
|||||
0x6000:0f Status__TxPDO State BOOL |
|||||
0x6000:10 Status__TxPDO Toggle BOOL |
|||||
0x6000:11 Value INT (16 bits) |
|||||
0x1a01: AI Compact |
|||||
0x6000:11 Value INT (16 bits) |
|||||