The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 4 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
r17 |
r18 |
r19 |
|
| Name | EL3602 2Ch. Ana. Input +/-10Volt, Diff. 24bit |
||||
| PID | 0x0e123052 |
||||
| Revision Code | 0x00100000 |
0x00110000 |
0x00120000 |
0x00130000 |
|
| Equivalant Devices | |||||
| TX PDOs | 0x1a00: AI Inputs Channel 1 |
||||
0x6000:01 Underrange BOOL |
|||||
0x6000:02 Overrange BOOL |
|||||
0x6000:03 Limit 1 BIT2 (2 bits) |
|||||
0x6000:05 Limit 2 BIT2 (2 bits) |
|||||
0x6000:07 Error BOOL |
|||||
0x6000:11 Value DINT (32 bits) |
|||||
0x1a01: AI Inputs Channel 2 |
|||||
0x6010:01 Underrange BOOL |
|||||
0x6010:02 Overrange BOOL |
|||||
0x6010:03 Limit 1 BIT2 (2 bits) |
|||||
0x6010:05 Limit 2 BIT2 (2 bits) |
|||||
0x6010:07 Error BOOL |
|||||
0x6010:11 Value DINT (32 bits) |
|||||