The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
|
| Name | ELX5151 1Ch. Inc. Encoder NAMUR, Ex i |
|
| PID | 0x970c3ff9 |
|
| Revision Code | 0x00100000 |
|
| Equivalant Devices | ||
| TX PDOs | 0x1a00: ENC Status |
|
0x6000:03 Status__Set counter done BOOL |
||
0x6000:07 Status__Open circuit BOOL |
||
0x6000:08 Status__Extrapolation stall BOOL |
||
0x6000:09 Status__Status of input A BOOL |
||
0x6000:0a Status__Status of input B BOOL |
||
0x6000:0e Status__Sync error BOOL |
||
0x6000:0f Status__TxPDO State BOOL |
||
0x6000:10 Status__TxPDO Toggle BOOL |
||
0x6000:11 Counter value UDINT (32 bits) |
||
0x1a01: ENC Status compact |
||
0x6000:03 Status__Set counter done BOOL |
||
0x6000:07 Status__Open circuit BOOL |
||
0x6000:08 Status__Extrapolation stall BOOL |
||
0x6000:09 Status__Status of input A BOOL |
||
0x6000:0a Status__Status of input B BOOL |
||
0x6000:0e Status__Sync error BOOL |
||
0x6000:0f Status__TxPDO State BOOL |
||
0x6000:10 Status__TxPDO Toggle BOOL |
||
0x6000:11 Counter value UINT (16 bits) |
||
0x1a02: ENC Period |
||
0x6000:14 Period value UDINT (32 bits) |
||
0x1a03: ENC Frequency |
||
0x6000:13 Frequency value UDINT (32 bits) |
||
0x1a04: ENC Timest. |
||
0x6000:16 Timestamp ULINT (64 bits) |
||
0x1a05: ENC Timest. compact |
||
0x6000:16 Timestamp UDINT (32 bits) |
||
| RX PDOs | 0x1600: ENC Control |
|
0x7000:03 Control__Set counter BOOL |
||
0x7000:11 Set counter value UDINT (32 bits) |
||
0x1601: ENC Control compact |
||
0x7000:03 Control__Set counter BOOL |
||
0x7000:11 Set counter value UINT (16 bits) |