The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
|
| Name | EM3712 2Ch relative pressure measuring terminal -1,000...+1,000 hPa (-1...+1 bar) |
|
| PID | 0x0e803452 |
|
| Revision Code | 0x00100000 |
|
| Equivalant Devices | ||
| TX PDOs | 0x1a00: AI Input Channel 1 |
|
0x6000:01 Status__Underrange BOOL |
||
0x6000:02 Status__Overrange BOOL |
||
0x6000:03 Status__Limit 1 BIT2 (2 bits) |
||
0x6000:05 Status__Limit 2 BIT2 (2 bits) |
||
0x6000:07 Status__Error BOOL |
||
0x6000:0f Status__TxPDO State BOOL |
||
0x6000:11 Value INT (16 bits) |
||
0x1a01: AI Input Channel 2 |
||
0x6010:01 Status__Underrange BOOL |
||
0x6010:02 Status__Overrange BOOL |
||
0x6010:03 Status__Limit 1 BIT2 (2 bits) |
||
0x6010:05 Status__Limit 2 BIT2 (2 bits) |
||
0x6010:07 Status__Error BOOL |
||
0x6010:0f Status__TxPDO State BOOL |
||
0x6010:11 Value INT (16 bits) |