The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
Revision | r16 |
|
Name | EP4314-1002 2Ch. Ana. Input -20/0/4-20mA; 2Ch. Ana. Output -20/0/4-20mA configurable |
|
PID | 0x10da4052 |
|
Revision Code | 0x001003ea |
|
Equivalant Devices | EPP4314-1002 r16 |
|
TX PDOs | 0x1a00: DI Inputs |
|
0x6000:01 Input 1 BOOL |
||
0x6000:02 Input 2 BOOL |
||
0x6000:0f TxPDO State BOOL |
||
0x6000:10 TxPDO Toggle BOOL |
||
0x1a01: AI Standard Channel 1 |
||
0x6010:01 Status__Underrange BOOL |
||
0x6010:02 Status__Overrange BOOL |
||
0x6010:03 Status__Limit 1 BIT2 (2 bits) |
||
0x6010:05 Status__Limit 2 BIT2 (2 bits) |
||
0x6010:07 Status__Error BOOL |
||
0x6010:0f Status__TxPDO State BOOL |
||
0x6010:10 Status__TxPDO Toggle BOOL |
||
0x6010:11 Value INT (16 bits) |
||
0x1a02: AI Compact Channel 1 |
||
0x6010:11 Value INT (16 bits) |
||
0x1a03: AI Standard Channel 2 |
||
0x6020:01 Status__Underrange BOOL |
||
0x6020:02 Status__Overrange BOOL |
||
0x6020:03 Status__Limit 1 BIT2 (2 bits) |
||
0x6020:05 Status__Limit 2 BIT2 (2 bits) |
||
0x6020:07 Status__Error BOOL |
||
0x6020:0f Status__TxPDO State BOOL |
||
0x6020:10 Status__TxPDO Toggle BOOL |
||
0x6020:11 Value INT (16 bits) |
||
0x1a04: AI Compact Channel 2 |
||
0x6020:11 Value INT (16 bits) |
||
0x1a05: AO Inputs Channel 1 |
||
0x6030:01 Load Impedance too High BOOL |
||
0x6030:07 Error BOOL |
||
0x1a06: AO Inputs Channel 2 |
||
0x6040:01 Load Impedance too High BOOL |
||
0x6040:07 Error BOOL |
||
RX PDOs | 0x1600: AO Standard Channel 1 |
|
0x7030:01 Analog output INT (16 bits) |
||
0x1601: AO Standard Channel 2 |
||
0x7040:01 Analog output INT (16 bits) |