The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r16 |
|
| Name | EL2044 4Ch. Dig. Output 24V, 2A, Diagnostic |
|
| PID | 0x07fc3052 |
|
| Revision Code | 0x00100000 |
|
| Equivalant Devices | EL2014 r16 |
|
| TX PDOs | 0x1a00: DIG Diag Inputs |
|
0x6001:01 Channel 1__Overtemperature BOOL |
||
0x6001:02 Channel 1__Open Load BOOL |
||
0x6001:03 Channel 1__Overcurrent BOOL |
||
0x6001:04 Channel 1__Short Circuit to 24V BOOL |
||
0x6011:01 Channel 2__Overtemperature BOOL |
||
0x6011:02 Channel 2__Open Load BOOL |
||
0x6011:03 Channel 2__Overcurrent BOOL |
||
0x6011:04 Channel 2__Short Circuit to 24V BOOL |
||
0x6021:01 Channel 3__Overtemperature BOOL |
||
0x6021:02 Channel 3__Open Load BOOL |
||
0x6021:03 Channel 3__Overcurrent BOOL |
||
0x6021:04 Channel 3__Short Circuit to 24V BOOL |
||
0x6031:01 Channel 4__Overtemperature BOOL |
||
0x6031:02 Channel 4__Open Load BOOL |
||
0x6031:03 Channel 4__Overcurrent BOOL |
||
0x6031:04 Channel 4__Short Circuit to 24V BOOL |
||
0x1a02: DIG Inputs Device |
||
| RX PDOs | 0x1600: DIG Outputs |
|
0x7000:01 Channel 1__Output BOOL |
||
0x7010:01 Channel 2__Output BOOL |
||
0x7020:01 Channel 3__Output BOOL |
||
0x7030:01 Channel 4__Output BOOL |