The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 5 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
| Revision | r17 |
r18 |
r19 |
r20 |
r21 |
|
| Name | EL3692 2Ch. resistance measurement terminal |
|||||
| PID | 0x0e6c3052 |
|||||
| Revision Code | 0x00110000 |
0x00120000 |
0x00130000 |
0x00140000 |
0x00150000 |
|
| Equivalant Devices | EL3692-0030 r21 |
|||||
| TX PDOs | 0x1a00: SAI Inputs Channel 1 |
|||||
0x6000:01 Status__Underrange BOOL |
||||||
0x6000:02 Status__Overrange BOOL |
||||||
0x6000:03 Status__Extended range BOOL |
||||||
0x6000:04 Status__Data invalid BOOL |
||||||
0x6000:05 Status__Range invalid BOOL |
||||||
0x6000:06 Status__Autorange disabled BOOL |
||||||
0x6000:07 Status__Error BOOL |
||||||
0x6000:09 Status__Steady state BOOL |
||||||
0x6000:0f Status__TxPDO State BOOL |
||||||
0x6000:10 Status__TxPDO Toggle BOOL |
||||||
0x6000:11 Value DINT (32 bits) |
||||||
0x1a01: SAI Range Channel 1 |
||||||
0x6001:05 Settings__Mode BIT4 (4 bits) |
||||||
0x6001:09 Settings__Range SINT (8 bits) |
||||||
0x1a02: SAI Inputs Real Channel 1 |
||||||
0x6002:01 Value REAL (32 bits) |
||||||
0x1a03: SAI Inputs Channel 2 |
||||||
0x6010:01 Status__Underrange BOOL |
||||||
0x6010:02 Status__Overrange BOOL |
||||||
0x6010:03 Status__Extended range BOOL |
||||||
0x6010:04 Status__Data invalid BOOL |
||||||
0x6010:05 Status__Range invalid BOOL |
||||||
0x6010:06 Status__Autorange disabled BOOL |
||||||
0x6010:07 Status__Error BOOL |
||||||
0x6010:09 Status__Steady state BOOL |
||||||
0x6010:0f Status__TxPDO State BOOL |
||||||
0x6010:10 Status__TxPDO Toggle BOOL |
||||||
0x6010:11 Value DINT (32 bits) |
||||||
0x1a04: SAI Range Channel 2 |
||||||
0x6011:05 Settings__Mode BIT4 (4 bits) |
||||||
0x6011:09 Settings__Range SINT (8 bits) |
||||||
0x1a05: SAI Inputs Real Channel 2 |
||||||
0x6012:01 Value REAL (32 bits) |
||||||
| RX PDOs | 0x1600: SAI Rang Channel 1 |
0x1600: SAI Range Control Channel 1 |
||||
0x7000:01 Control__Disable autorange BOOL |
||||||
0x7000:04 Control__Start conversion BOOL |
||||||
0x7000:05 Control__Mode BIT4 (4 bits) |
||||||
0x7000:09 Control__Range SINT (8 bits) |
||||||
0x1601: SAI Rang Channel 2 |
0x1601: SAI Range Control Channel 2 |
|||||
0x7010:01 Control__Disable autorange BOOL |
||||||
0x7010:04 Control__Start conversion BOOL |
||||||
0x7010:05 Control__Mode BIT4 (4 bits) |
||||||
0x7010:09 Control__Range SINT (8 bits) |
||||||