The ESI data ingested by github.com/linuxcnc-ethercat/esi-data describes 1 revision(s) of this hardware. Here are the known revisions and their differences.
This also includes the send and receive PDOs defined for each revision, and a link to other known devices with identical PDOs.
Revision | r18 |
|
Name | EL9222-6600 Overcurrent protection 24V DC, 2Ch., max. 4A, adjustable |
|
PID | 0x24063052 |
|
Revision Code | 0x001219c8 |
|
Equivalant Devices | EL9222-4433 r18 |
|
TX PDOs | 0x1a00: OCP Inputs Channel 1 |
|
0x6000:01 Status__Enabled BOOL |
||
0x6000:02 Status__Tripped BOOL |
||
0x6000:05 Status__Hardware Protection BOOL |
||
0x6000:08 Status__Current Level Warning BOOL |
||
0x6000:09 Status__Cool Down Lock BOOL |
||
0x6000:0d Status__Diag BOOL |
||
0x6000:0e Status__TxPDO State BOOL |
||
0x6000:0f Status__Input cycle counter BIT2 (2 bits) |
||
0x6000:13 Status__Error BOOL |
||
0x6000:14 Status__State Reset BOOL |
||
0x6000:15 Status__State Switch BOOL |
||
0x1a01: OCP Inputs Channel 2 |
||
0x6010:01 Status__Enabled BOOL |
||
0x6010:02 Status__Tripped BOOL |
||
0x6010:05 Status__Hardware Protection BOOL |
||
0x6010:08 Status__Current Level Warning BOOL |
||
0x6010:09 Status__Cool Down Lock BOOL |
||
0x6010:0d Status__Diag BOOL |
||
0x6010:0e Status__TxPDO State BOOL |
||
0x6010:0f Status__Input cycle counter BIT2 (2 bits) |
||
0x6010:13 Status__Error BOOL |
||
0x6010:14 Status__State Reset BOOL |
||
0x6010:15 Status__State Switch BOOL |
||
RX PDOs | 0x1600: OCP Outputs Channel 1 |
|
0x7000:01 Control__Reset BOOL |
||
0x7000:02 Control__Switch BOOL |
||
0x1601: OCP Outputs Channel 2 |
||
0x7010:01 Control__Reset BOOL |
||
0x7010:02 Control__Switch BOOL |